Note the following clearance depend on the manufacture of the plate.
B - To a sheared or hand flame cut edge
C - To a rolled, sawn, planed or machine flame cut edge.
Nominal Size (d) | Clearance Hoe(D) | Pitch (A) | Min Edge(B) | Min Edge(C) |
M12 | 14 | 30 | 20 | 18 |
M16 | 18 | 40 | 26 | 23 |
M20 | 22 | 50 | 31 | 28 |
M24 | 26 | 60 | 37 | 33 |
M27 | 30 | 68 | 42 | 38 |
M30 | 33 | 75 | 47 | 42 |
M36 | 39 | 90 | 55 | 49 |
All dimensions are in millimetres.
Note provided for information only, information has not been checked by an independent source, therefore if you use this information you do so at your risk.